The Cooler You Would Look Forward to for Your CPU

If we consider the processor as a heart computer, it depends on its cooling depends on a stable and high-quality work of the whole “body” because if the processor starts to overheat or stops working stably, this affects the further functioning of all applications and can lead to serious PC failure. Therefore, the choice of the processor cooling system, which is the processor cooler, must be taken seriously.

Processor Coolers You Can Go for

The processor cooler includes two of the most important components the fan and the radiator. In our time on the “iron” market computer you can find a large number of coolers for all tastes from boxed solutions (boxed), which are supplied with the best CPU heatsink manufacturers and end with the gold or bright LED variety of colors. But choosing a cooler for the processor is worth it in the first place, based on its technical characteristics rather than the aesthetic aspect even a “maker” knows that the temperature of the processor and graphics card affect the additional computer and if the devices overheat, the computer may simply fail. Choosing the CPU cooler for i7 9700k would be perfect under the circumstances.

For the Modern Coolers

Many modern coolers have the ability to change the fan speed at the expense of the speed, depending on the temperature at which the processor is heated simultaneously. The radiators also differ in the size of the radiator, the number and thickness of the ribs, the thickness of the sole and the materials that make up the radiator.

So how do you navigate with such a large selection of these devices on the market and choose the best CPU cooler?

  • To begin with, let’s clarify the main points that should be paid attention to when buying a cooler.
  • Small high-speed cooler capable of pumping the same amount of air per unit of time as a larger, but “slower” cooler. This speed will mainly affect the level of noise emitted by the cooler. Often, the manufacturers of these devices indicate the chiller noise in its decibel specifications (a short designation “db”). We must also not forget that the processor cooler, which has stopped completely or which has become noisy due to its development, can be replaced without problems from the same size.

All fans for coolers can be divided into two large groups those that use a sliding bearing and those in which several (or even one) rolling bearings are installed. Usually the coolers or the fans themselves have an index on which the type of bearing used belongs to a particular type: the rolling bearings are indicated with the index “b” (two rolling bearings “2b”, respectively) and the sliding bearings are marked with “s”. Fans with rolling bearings are more expensive, but will last much longer and have high reliability during service.


Almost all CPU cooling is done from aluminum or copper. Copper is more expensive and heavy material, but, with better thermal conductivity, it better removes heat from the processor. The best option is an aluminum cooler, with a copper pad at the point of contact of the chiller with the processor. Cooling performance will affect the height, thickness and number of radiator fins viewing the processor temperature will allow you to choose the best option, but you can rely on the data provided by the manufacturers in this matter.

Leave a Reply

Your email address will not be published. Required fields are marked *